Selenio
TM
BNP User Guide, Release 3.7.1
160
- Grooming - Mapping
Figure 102. Manage Elementary Streams - Preconfigured for PMT
2.
Click
OK
to save and use the new configuration. The new or modified ES will be displayed in the
Outputs
panel of the
Grooming -> Mapping
window.
Essential information about the table columns in the
Manage Elementary Streams
screen is provided
.
Table 83.
Manage Elementary Streams Screen—ES Configuration Columns
Column
Description
Dummy
Read-only if stream is groomed; only applicable for data stream. Clicking this
field will bring up a drop down box with the following options:
•
Yes:
Select this if the elementary stream is a dummy stream and the
associated data stream with the same PID is carried by another program
in the same transport stream.
•
No:
This is a read-only value which will appear if the PID is “non-dummy”
and therefore treated as a regular stream.
Note: The
Preconfigured for PMT
and
Dummy
fields are mutually exclusive;
therefore, when one is set to
Yes
, the other will be automatically set to
No
ES Type
Read-only if changes have been saved (i.e.,
OK
has been clicked). If the
changes to the stream have not yet been applied, clicking this field will open
a drop down menu with the following options from which to choose:
Audio, Data, or Video.
Grooming Status
Read-only. Displays whether or not the stream is currently groomed.
PID
Read-only if changes have been saved (i.e.,
OK
has been clicked). If the
changes to the stream have not yet been applied, double-clicking this field
allow you to modify the PID associated with the new elementary stream.
• You must enter this value as a decimal conversion of the hex format which
appears in the
Grooming -> Mapping
window.
Preconfigured for PMT
Read-only if stream is groomed; applies to all stream types, but most useful
for EBIF / EISS streams.
• Provides the ability to preconfigure the ES by creating associated
descriptor rules, regardless of whether or not the data for the
corresponding ES is present in the MPEG stream. When the
Preconfigured for PMT
option is set to
Yes
, the BNP will not update the
PMT, as the assumption is the data is already included in the PMT.
Note: The
Preconfigured for PMT
and
Dummy
fields are mutually exclusive;
therefore, when one is set to
Yes
, the other will be automatically set to
No
.
