Selenio
TM
BNP User Guide, Release 3.7.1
180
- Managing PMT and ES Descriptors
shows an example of the DEC to HEX toggle view in the
Add Descriptor Rule
window.
Figure 129. Add Descriptor Rule - DEC to HEX toggle
Editing Program Descriptor Rules
Use the
Add Descriptor
dialog, from the
Edit Rule
option, to modify details for a specified descriptor
rule.
Menu Path
Manage Descriptor Rules
screen, highlight one of the displayed rules, and click the
Edit
Rule
button -->
Add Descriptor
dialog.
1.
Use guidelines listed in Table 85 on page 179 to enter parameters for a descriptor rule.
If the rule you wish to edit has already been applied to the BNP, you will only be able to edit the
Descriptor Data
field.
2.
Click
OK
to save changes.
The status field at the far left of the
Manage Descriptor Rules
window will show a status of
“Changed.”
TAG
Specifies the TAG of the stream. First 8 bits of the descriptor packet as
viewed from an MPEG analyzer.
Valid range is from 0 to 255 (decimal) or 0 to FF (hex), up to 8 bits.
• Clicking the green DEC button in this field will toggle the field from decimal
to hex view.
• Clicking the green HEX button in this field will toggle the field from hex to
decimal view.
for an example of the DEC to HEX toggle view.
Descriptor Data (Hex Data):
Enter the hex value program descriptor to be appended or removed to or
from the PMT of the output stream.
• This value must be an even numbered hex value.
• This value must be an exact match for the program descriptor as known or
discovered through an MPEG
analyzer. The BNP will not discover or
display the descriptors from the actual TS.
• When the rule applies to an input stream, the Descriptor Data field is
passed through based on information from the input program.
Table 85.
Manage Descriptor Rules fields (Continued)
Field
Description
