Selenio
TM
BNP User Guide, Release 3.7.1
190
- Clearing the Web Start Cache
Clearing the Web Start Cache
Any time that you downgrade software, you must clear the cache from the Java Web Start. Older
versions of the
BNP
Element Manager
use Web Start when the
BNP Element Manager
is started. This is
only needed when you change to a software version previous to the current one.
To clear the Java Web Start cache (on a Windows system)
1.
From the Windows
Start
Menu, select
Settings
->
Control
Panel
->
Java
to launch the
Java Control Panel
.
2.
From the
Temporary Internet
Files
section, click the
Settings button
.
3.
At the
Temporary Files Settings
screen now on display, click
Delete Files
and
OK
.
4.
Click Advanced tab, and check to ensure that the
Application and Applets
and
Trace and Log Files
boxes
are checked.
5.
Click
OK
to clear the cache and close the Java Control
application.
Managing Licenses
The determination of what type of license is used for a particular transport stream and its bandwidth is
made when you configure an output transport stream. A transport stream can only be assigned to a
license type after the license has been installed. For more information on configuring various types of
output transport streams, see the relevant sections in the
Grooming and PSIP
chapter of the
BNP User
Guide
.
BNP licensing is based on the total bandwidth of output multiplexes where each Mux can be MPTS or
SPTS. An associated license allows the creation of as many Mux or programs as will fit in the licensed
bandwidth. For example, z40 Mbps Mux allows a MPTS with programs averaging at around 2.5 Mbps,
or 10 CBR SPTS programs at 4 Mbps.
All license keys are tied to the serial number of the compact flash card, which allows flash portability
and access to stored configurations.
Topics in this section:
•
“BNP License Types,” next.
•
“Purchasing Licenses” on page 191.
•
“Activating a License Key” on page 192.
•
“Checking Hardware Capacity Status” on page 193.
•
