Selenio
TM
BNP User Guide, Release 3.7.1
202
Digital Program Insertion (DPI)
- Setting SCTE 30 and SCTE 35 Message Handling
Setting SCTE 30 and SCTE 35 Message Handling
The BNP is capable of receiving SCTE 30 messages from an ad server and converting those messages
into SCTE 35 messages.
Figure 142. SCTE 30 to SCTE 35 Conversion
B N P
B N P
The BNP is also capable of forwarding SCTE 35 messages from input streams to output streams during
network time and ad time.
To set SCTE 30 and 35 message handling options:
1.
Launch the
Element Manager
and log in as the administrator as described in “Log in and Access the
BNP Element Manager” on page 25.
2.
Select the
Grooming -> Mapping
window.
3.
Groom an input program to an output transport stream as described in “Drag and Drop Grooming”
on page 140.
The
Configure Program Mapping
window appears.
4.
From the
Configure Program Mapping
window, check either the
Forward SCTE 35 Cue
or the
SCTE 30 to 35 Conversion
box.
