Selenio
TM
BNP User Guide, Release 3.7.1
215
- DVB-CA Configuration
Figure 152. Configure Program Mapping - DVB-CA
1.
In the
Destination
section, change the
Program Number
to the number
assigned and provided by
the CAS
.
2.
If you are using an external EIS server, you may need to reserve the elementary stream PIDs
per the
CAS configuration
to match those from the external EIS server.
If you are using an internal EIS server, reserving a PID is optional and you may proceed to
below.
In the
Component PIDs
section, double click on the
Output Type
or
PID
fields for each
elementary stream to assign a new reserved PID and to present the
Select Elementary Stream
screen.
In the example above and below in
and
, the
Input SCTE Video
PID of
16
will be changed to
3011
and the
AC-3 Audio
PID of
17
will be changed to
3012
.
Figure 153. Reserve ES PIDs - DVB-CA
Note:
When entering elementary stream PID values in the BNP Element Manager, the values must be
entered in decimal format. However—in the
Grooming -> Mapping
screen—these values will
always appear in hexadecimal format. It will be necessary to perform hex-to-decimal (and vice
versa) conversion during the DVB-CA configuration.
