Selenio
TM
BNP User Guide, Release 3.7.1
225
- DVB-CA Configuration
Step 3 Create EMMG
Up to four EMMGs may be created for a CAS.
1.
Under the
CAS Name
folder, right-click on the
EMMG List
folder and select
Create EMMG
from the pop-up menu:
The
Create EMMG
dialog is now in view.
2.
Use the
Create EMMG
dialog to define the client ID. At the
Client ID:
field, enter the Client ID number in
decimal
format
.
Note:
If this value is being provided by the CAS, you will most
likely receive this number in hexadecimal format. If so,
you will need to convert the format from hex to decimal in
order for this value to properly populate the field.
3.
Click
Apply
to save the displayed settings, exit this dialog,
and create the EMMG.
4.
Check the
CA System
tab page to ensure that the new
EMMG is now displayed in the list.
Step 4 Create EMM
1.
Under the
CAS Name
folder, right-click on the
Client ID
folder and select
Create EMM
from the pop-up menu.
The
Create EMM
dialog is now in view.
2.
Use the
Create EMM
dialog to set parameters for this EMM.
provides parameter descriptions for this
configuration.
3.
Click
Apply
to save the displayed settings, exit this dialog,
and create the EMM.
4.
At the
CA System
tab page, check to ensure that the new
EMM is added under the
Client ID
folder.
