Selenio
TM
BNP User Guide, Release 3.7.1
226
- DVB-CA Configuration
:
Table 96.
Create EMM
parameters
Field
Description
Provided by:
Client ID
Displays the value created in the Create EMMG dialog.
This value is read-only.
CAS
Data ID
Specifies the unique identification of an EMM / private data
stream of a Client ID.
Range is 0 to 65535
CAS
Private Data
Enter additional data into the CA descriptor in the PMT.
• For a service, add private data into the program level’s CA
descriptor.
• For an ES, add private data into the ES level’s CA
descriptor.
• Default is blank.
• Format must be hex.
CAS
Second CAS ID
Enter the second CAS ID (if provided with one) from the CAS
vendor.
Range is 0 to 65535; enter 0 if not using a second CAS ID.
CAS (optionally)
Max Bandwidth (kbps)
Enter the maximum bandwidth that will be allocated by the
MUX.
CAS
Step 5 Join TS to EMM
1.
Under the
EMMG List
, expand the
Client ID
folder and right-click on an EMM to select
Join/
Disjoin TS to EMM
from the popup menu.
The
Join/Disjoin TS to EMM
screen is now in view.
