Selenio
TM
BNP User Guide, Release 3.7.1
248
- Use Case Configuration Examples
Figure 186. Input program (with ETV data) groomed to TS; Late-bound
Additional
ETV ESs to
be used for
The
Configure Program Mapping
window will open.
4.
In the
ETV Configuration
section, click on the
PIDs Priority
drop-down box and select
Network
.
When
Network
is selected in
PIDs Priority,
the
Play Preference
drop-down box will be displayed.
5.
In the
Play Preference
drop-down box and select the
Play during ad only
option.
The
Configure Program Mapping
window will look similar to
.
Note:
The times displayed in the Alarms and Events table are quoted local to the time zone from the
NPM server collocation which governs the Daylight Savings Time (DST) rules in effect and the
specific time zone abbreviations. All system alarm (raised and cleared) times are displayed in the
server time zone. The server time zone may be controlled from the client’s configuration screen.
Figure 187. Configure Program Mapping - Play during ad only
Click the “...” to select
a late-bind source
When the
Play during ad only
option is selected, the
Late Bind Source
field will be displayed.
