Selenio
TM
BNP User Guide, Release 3.7.1
88
- Messaging System Configuration
-
Table 55, “Buttons - Zone Overlay,” on page 86.
2.
Click
Apply
to save and upload new changes to the overlay zone.
Deleting a Logo Overly Zone
1.
From the
Configuration -> Messaging System -> Logo Overlay Zones
menu, highlight and
right-click on the Logo Overlay Zone you wish to delete.
2.
Select
Delete Logo Overlay Zone
from the pop-up menu (Figure 44, “Logo Overlay Zone screen,”
-
If no output transport streams are associated with the selected zone, you will be asked to
confirm deletion of the zone and the zone will be deleted.
-
If output transport streams are associated with the selected
zone, the
Delete Messaging Zone
dialog will query for
confirmation of the deletion.
3.
Click
Yes
to delete the zone and its association to any programs.
Messaging System Zone Priority
At any given time there can be only one Messaging System zone active for a particular program, even
though each type of zone (EAS, Operator and Advanced, or Logo Overlay) can be enabled or associated
to a particular program at the same time. If all associated zones have been activated, the priority of
message playout is as follows:
1.
EAS Messaging
- will always override any Operator-defined crawl or Logo Overlay for the duration
of EAS playout.
2.
Operator and Advanced Messaging
- will override an active Logo Overlay for the duration of
playout. If playout is continuous and Logo Overlay is also active, then no Logo Overlay will be seen.
3.
Logo Overlay
- no override.
As an example, let us assume that a program playing on Channel 2 has all three zones configured with
EAS, Operator and Advanced, and Logo Overlay zones, with a scheduled
Operator Messaging
text
crawl scheduled to playout one cycle every hour and a continuously active
Logo Overlay
. During the
time that the
Operator Messaging crawl is scheduled to play, the Logo Overlay will not be present,
however, when the crawl has finished its cycle the Logo Overlay will return. If, at any time, an EAS
message is generated, both the Operator crawl and the Logo Overlay (after the crawl has finished) will
be overridden until the EAS messaged has completed its cycle.
