Selenio
TM
BNP User Guide, Release 3.7.1
89
- Messaging System Configuration
Show Program List
Within each Messaging System zone you can view which active programs have been configured and
enabled for messaging services.
Programs Configured for Messaging Services
When a program is groomed from an input source to an output transport stream, you can specify
which
Messaging System Settings
are configured (or associated) on a per program basis. A program
can be associated with any or all three Messaging zone types (EAS, Operator and Advanced, and Logo
Overlay). For more information on associating programs for Messaging Zones, see “Managing Output
Transport Streams” on page 113.
Managing Program Activity for Messaging Service Zones
An output program may join or leave a Messaging Service zone at any time. The changes take effect
the next time a message event starts. Once a program has been associated with a Messaging Service
zone, the program can then be enabled or disabled for the specified zone either from the
Grooming -
> Mapping
screen (see “Managing Output Transport Streams” on page 113) or through the
Show
Program List
screen.
The
Show Program List
screen (
) displays all output programs across all transport streams on
all ports (GigE and ASI) that are currently enabled for the selected zone. You can use this screen to
enable or disable Messaging Service operation for one or all programs in a zone.
Use any of the following methods to access the
Zone Program List
:
Menu Path
Configuration
tab
-> Messaging System
tab
->
Messaging Zones
screen -> right-
click in the zone’s row for popup menu --> select
Show Program List
(
OR
Configuration
tab
-> Messaging System
tab
->
Logo Overlay Zones
screen -> right-
click in the zone’s row for popup menu -> select
Show Program List.
OR
From the
Modify Messaging Zone
screen -> click the
Show Program List
button.
OR
From the
Modify Logo Overlay Zone
screen - > click the
Show Program List
button.
