Selenio
TM
BNP User Guide, Release 3.7.1
95
- Overview
After you complete the “Basic BNP Redundancy Configuration” on page 96, you can also use this
screen to switch the roles of the current active and standby BNPs, by clicking the
Redundancy Switch
button (see also “Forcing Redundancy” on page 98).
Figure 49.
Global tab screen
Table 56.
Chassis Redundancy Parameters
Field
Description/Values
Chassis Active Status
Read-only field that displays the current role of this chassis, as either
Primary
or
Standby.
Redundancy Switch (button)
Toggle the Primary and Standby BNPs in a redundant configuration.
IP Address for 10/100
Enter the IP address of the 10/100 port at the partner system:
• In the
BNP
Element Manager
GUI for the Active chassis, enter the IP
address of the Standby chassis.
• In the
BNP
Element Manager
GUI for the Standby chassis, enter the IP
address of the Active chassis.
IP Address for GigE 8
(Optional)
Enter the IP address of the GigE 8 port, if used, to pass redundancy
information.
This port is essential to the configuration described in “Configuring GigE Ports
for Heartbeat Detection” on page 98.