Selenio
TM
VMG-14+ Hardware Setup Guide
59
Using Element Manager to Finalize Initial Configuration
Gen2 Release 1.4.0
5.
In the
System
tab, enter the value for (minimally) one NTP server address and the
Time Zone
.
6.
Optionally, enter the
Syslog Server IP Address
and
Port
number (the typically UDP port for syslog
is 514).
7.
Click on the
Management Interface
tab (
) to access configuration fields for the virtual
(management) IP address of the system. The IP address configured here will be used to access the
VMG-14+.
Figure 41.
Global Configuration - Management Interface Tab
8.
In the
Virtual IP Address
section, enter the
IP Address
,
Subnet Mask
(netmask), and
Gateway
(default router) address (if used).
9.
Click
Apply
(or use
Alt a
) button to commit the values and complete initial configuration.
Note:
For instructions on configuring the VMG-14+ with the Element Manager, refer to the Selenio
TM
VMG-14+ Element Manager User Guide.
