DFK 33UX252 Technical Reference Manual
42
Camera Controls
Parameter
Auto Functions ROI Width
Minimum
16
Maximum
2592
USB3 Vision: GenICam
AutoFunctionsROIWidth
Video4Linux2
Auto Functions ROI Width
VCD Property
VCDID_AutoRoi
\VCDElement_AutoRoiWidthRelative
Parameter
Auto Functions ROI Height
Minimum
16
Maximum
2048
USB3 Vision: GenICam
AutoFunctionsROIHeight
Video4Linux2
Auto Functions ROI Height
VCD Property
VCDID_AutoRoi
\VCDElement_AutoRoiHeightRelative
5.12 User Sets
The 33U series cameras can store their complete configuration into built-in non-volatile
memory. The camera configuration can be saved into and restored from one of two
available memory slots upon user's request. Additionally, the camera can be configured
to load one of the user's camera configurations at startup.
5.12.1
User Set Selector
The
User Set Selector
parameter selects the memory slot on which consecutive load and
save commands are executed.
Parameter
User Set Selector
UserSet1
First of the two memory slots for user configurations
UserSet2
Second of the two memory slots for user configurations
Default
A special memory slot that always contains the camera's
factory default configuration. It cannot be overwritten
USB3 Vision: GenICam
UserSetSelector
5.12.2
Load User Set
By using the
Load User Set
command, the user can restore the camera configuration
from the memory slot selected by
User Set Selector
.
