48
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 10.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the
Start Here OSX
icon to
install the printer driver, Scanner driver,
PC-FAX Send and Remote Setup program.
(Scanning is not supported in Mac OS
®
10.1).
5
Click
Install
next to the Multi-Function
Suite.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the
machine.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Plug the machine into the AC power outlet.
Turn the power switch on.
9
Select
Applications
from the
Go
menu.
0
Open the
Utilities
folder.
For USB Interface Cable Users
For Mac OS
®
X 10.1/10.2.1 - 10.3 or greater
Step 2
Summary of Contents for sx2100
Page 61: ......
