11
ENGLISH
(C)
Hard Disks connected as Master and Slave devices on the Primary IDE port; CD-
ROM or DVD-ROM connected as Master on the Secondary IDE port.
Change the CD-ROM or DVD-ROM jumper to
SLAVE
and re-connect it to the
Secondary IDE port. Set the DVD Writer’s jumper to
MASTER
, and connect the
DVD Writer as Master to the Secondary IDE port.
◆
Changing the Jumper:
The
Master/Slave
jumper can be used to set the DVD Writer to
Master
or
Slave
device.
The following figure is the illustration of jumper setting.
M
A
S
L
C
S
Master Device
M
A
S
L
C
S
Slave Device
(Default setting)
Figure: The setting of Master or Slave device.
NOTE
: Do not use two jumpers to set MA and SL simultaneously.
CS (CSEL)
If you choose the CS setting, the Master/Slave setting will be made automatically
depending on your hardware configuration.
