3
3、Safety precautions
Precautions for safe use of automata
1. In order to prevent accidents caused by electric shock, please do not open
the cover of the motor electrical box or touch the parts in the electrical box
when the power is turned on.
1. In order to prevent personal injury, please do not operate the machine with
the belt guard, finger protector and other safety devices removed
2. In order to prevent personal accidents involving the machine, please keep
fingers, hair and clothes away from the belt pulley, V-belt and motor during
the operation of the sewing machine, and do not put objects on it.
3. In order to prevent personal injury, please do not put your finger near the
needle when turning on the power or when the sewing machine is running.
4. In order to prevent personal injury, please do not put your fingers in the
thread take-up rod cover when the sewing machine is running.
5. When the sewing machine is running, it turns at a high speed. In order to
prevent injury to your hands, please never let your hands near the cloth cutter
during operation. In addition, please turn off the power supply when changing
the cable.
6. In order to prevent personal injury, please take care not to pinch your
fingers when the sewing machine moves up and down or returns to its original
position.
7. When the sewing machine is running, please do not cut off the power or air
supply.
8. In order to prevent accidents caused by sudden start-up, when the preparatory
work is finished and the sewing can be carried out, please remove the cloth
guide.
9. In order to prevent accidents caused by electric shock, please do not operate
the sewing machine when the power ground wire is removed.
10. In order to prevent accidents caused by electric shock and damage of
electrical parts, please turn off the power switch before plugging in and out
the power plug.
11. In order to prevent accidents caused by damage of electrical parts, please
stop the operation and unplug the power plug for safety during thunder.
12. In order to prevent accidents caused by damage to electrical parts,
condensation will occur when moving from cold places to warm places, etc., so
please turn on the power after the water drops are completely dry.
13. Because this product is a precision machine, please pay full attention to
the operation, do not splash water and oil on the machine, and do not let the
machine drop to impact the machine.
14. This machine is a class A industrial machine. If this machine is used in
the home environment, the phenomenon of radio interference may occur. At this
time, please take appropriate measures to solve the problem of radio
interference.
Summary of Contents for MB2002B-BS-FT7010
Page 3: ...ENGLISH...
