background image

Safety Certifications 

  UL/CUL:   Listed to Safety of Information Technology Equipment, including 

Electrical Business Equipment. 

 

CE:   The products described herein comply with the Council Directive on 

Electromagnetic Compatibility (89/336/EEC) and the Council Directive 
on Electrical Equipment Designed for use within Certain Voltage Limits 
(73/23/EEC).  Certified to Safety of Information Technology Equipment, 
Including Electrical Business Equipment.  For further details, contact 
IMC Networks. 

 

 

 

 

 

 

 

 

European Directive 2002/96/EC (WEEE) requires that any equipment that bears this 
symbol on product or packaging must not be disposed of with unsorted municipal 
waste.  This symbol indicates that the equipment should be disposed of separately 
from regular household waste.  It is the consumer’s responsibility to dispose of this 
and all equipment so marked through designated collection facilities appointed by 
government or local authorities.  Following these steps through proper disposal and 
recycling will help prevent potential negative consequences to the environment and 
human health.  For more detailed information about proper disposal, please contact 
local authorities, waste disposal services, or the point of purchase for this equipment. 

 

 

Class 1 Laser product, Luokan 1 Laserlaite,  
Laser Klasse 1, Appareil A’Laser de Classe 1 

Summary of Contents for IE-ModeConverter













Reviews: