43
VLAN on OPTIC Port - Configuration
To configure this mode, do the following:
1.
In the Main Configuration screen, press the
Space Bar
and type
config
. The
Configuration screen displays:
2.
Enter
N
in the Transparent Mode field and press any key (except S or Q) to open
the VLAN screen:
3.
Enter
Y
in the Tags column of the Optics row and enter a VLAN ID in the VLAN
IDs Current column of the Data row (for example, 13).
VLAN IDs Priorities Tags
Current Saved Current Saved
Ports
Optics [0 ] [0 ] [0 ] [0 ] [ Y ]
Data [0 ] [13 ] [0 ] [0 ] [ N ]
Data VLANs are used only if Tags are enabled on both the Optics and Data
Ports.
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
VLAN IDs Priorities Tags
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
0
] [0 ] [
0
] [
N
] if Tags are enabled on both
Data [0 ] [
0
] [0 ] [
0
] [
N
] the Optics and Data Ports.
Management VLAN EXT Mgmt Tag
SNMP [0 ] [
0
] [0 ] [
0
] [
N
]
Data VLANs <Optics <----> Data>
VLAN 1 [0 ] [
0
] VLAN 12 [0 ] [
0
] VLAN 23 [0 ] [
0
]
VLAN 2 [0 ] [
0
] VLAN 13 [0 ] [
0
] VLAN 24 [0 ] [
0
]
VLAN 3 [0 ] [
0
] VLAN 14 [0 ] [
0
] VLAN 25 [0 ] [
0
]
VLAN 4 [0 ] [
0
] VLAN 15 [0 ] [
0
] VLAN 26 [0 ] [
0
]
VLAN 5 [0 ] [
0
] VLAN 16 [0 ] [
0
] VLAN 27 [0 ] [
0
]
VLAN 6 [0 ] [
0
] VLAN 17 [0 ] [
0
] VLAN 28 [0 ] [
0
]
VLAN 7 [0 ] [
0
] VLAN 18 [0 ] [
0
] VLAN 29 [0 ] [
0
]
VLAN 8 [0 ] [
0
] VLAN 19 [0 ] [
0
] VLAN 30 [0 ] [
0
]
VLAN 9 [0 ] [
0
] VLAN 20 [0 ] [
0
] VLAN 31 [0 ] [
0
]
VLAN 10 [0 ] [
0
] VLAN 21 [0 ] [
0
] VLAN 32 [0 ] [
0
]
VLAN 11 [0 ] [
0
] VLAN 22 [0 ] [
0
]
Valid VLAN IDs are between 1 and 4094. Valid priorities are between 0 and 7.
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
Transparent Mode – with either (not both) Data and Optics Mgmt dipswitches
set to on, all traffic passes between Optics and Data port EXCEPT what has
been defined as the Management Domain. The Management Domain can either be
defined as untagged traffic or traffic with a specified VLAN ID.
In Transparent Mode with BOTH Optics and Data Mgmt dipswitches set to off,
all traffic passes between the Optics and Data Ports.
Default Mode – the unit passes only Untagged Packets.
The unit is currently
in Default Mode
.
Enter Y for Transparent Mode, N for no Transparent Mode or <enter> to
move to other options [ N ]
