IMDES CREATIVE SOLUTIONS Schulstrasse 21 D-48455 Bad Bentheim /Gildehaus Germany T:+49(0)5924-997337 E:
© 2019
IMDES CREATIVE SOLUTIONS
17
1.15.5 Removing Soldered parts:
The lid may be removed when the fans have stopped at the end of the cooling process; the soldered parts on the
product carrier
are cooled down to about 70 °C. – 158 ° F
As the soldered parts and
product carrier
are not at room temperature, use cotton gloves supplied to remove the
soldered part and product carrier.
We strongly discourage the use of pliers, tweezers or similar tools to remove the soldered parts as they may slip
from the tool and fall into the liquid Galden.
In case the soldered part falls into the liquid Galden, do not try to "Save’’ the soldered part fallen in to the
GALDEN. The result for such actions will be burns.
As the liquid GALDEN has now cooled on a non-critical components temperature of 160°C=320°F
(or less), the components on the circuit board will suffer no thermal damage.
Simply turn off the
DINO-CONDENS-
IT
and wait until the machine has completely cooled off.
No you can safely remove the soldered part.
1.15.6 Control panel
