IMDES CREATIVE SOLUTIONS Schulstrasse 21 D-48455 Bad Bentheim /Gildehaus Germany T:+49(0)5924-997337 E:
© 2019
IMDES CREATIVE SOLUTIONS
31
7.4 Screen printing of the
A
side with large components
To screen the
A
side of the PCB you need to use a PCB support holder
Use for the PCB support holder material that is thicker than the populated PCB and thick enough to function as a
support for the screening
The PCB support holder should be cut out to clear the SMT components from the first reflow.
Make sure all work surfaces are ESD safe or grounded.
Use epoxy or wood.
