2022/07/07 14:23
17/31
manual_egk-lw20w00
e n g i n k o . s u p p o r t . c e n t e r - https://www.enginko.com/support/
The temperature value is measured inside the sensor.
Once provisioned on a LoRaWAN® network, the device sends the distance, temperature, filling level
& timestamp to the server via uplink.
3.1 Level settings
Level measurements are carried out according to few parameter settings. A target over the defined
range cannot be detected. Read and write of parameters can be done using LoRaTool App. They have
a default value and can be modified to be tailored on the specific use case.
Meaning of parameters is related to following diagram. The “REFERENCE” (distance=0mm) is the top
surface of the sensor:
www.ime.de
