Attachment with screws, no external connections
To attach the device to the target with screws, two
M4 screws can be used, which provide the greatest
possible stability. The ELOC3 is equipped with two
4.5 mm holes for this purpose. Before attaching the
device, make sure that the mounting surface is
clean and without any irregularities. Drill two
4.5 mm holes in the mounting target at a distance of
92 mm. Be sure to maintain the distance accurately
to avoid mechanical damage when attaching. Also
make sure that the drilled holes are cleaned and
that no unevenness has occurred. Use two M4 screws, see
A)
, for the fixation. Insert the screws
through the holes provided and fix them with a nut, see
D)
.
Note, that the device may be exposed to high mechanical loads. For the highest
possible stability, the use of washers and crown rings, see
B)
and
C)
, is recommended.
20 / 33
www.ime.de
