A) Here, the Device ID is displayed. You are not able to change the ID in this window.
B) The type of the Device is detected automatically, depending on the Device ID.
C) Please enter the PAC. The PAC is printed on the device label as HEX value (0...F).
D) Give the device a clear name.
E) Enter a comment, if desired.
F) Enter a Tag, if desired. Tags can be used to arrange devices into groups. Example:
Level_1,Level2,...
G) The Timer Mode Frequency can be set individually: 1, 2, 3, 4, 6, 12 times / day
H) Threshold level that triggers motion mode. If this value is exceeded, a movement is
registered.
Please keep in mind, that an increased transmission frequency will lead to
a higher power consumption. If not really necessary, select a low Timer
Mode Frequency and / or Motion Mode Frequency.
5. The registration is finished. Now, the Device is waiting for Sigfox registration. This can take
several minutes.
A) As long as the registration has not been completed, "Waiting for registration" is
displayed in the column "Name". When the registration is complete, the selected name
appears here.
27 / 33
www.ime.de
