1.5
IP69K protection class
The ELOC3 complies with the IP69K protection class. This protection class has been designed for
high-pressure jet cleaning at high temperatures. The code number "6" stands for the Protection
against the penetration of dust, the "9" for protection for high-pressure cleaning at a small
distance and the "K" for the high temperature of the water used (hot water). Originally, it was
intended for vehicles as protection against the ingress of foreign bodies such as dust or dirt and
hot jet water.
The device can therefore be used in all conceivable operating conditions without getting damaged
or being unusable.
1.6
About this manual
Read this manual carefully. It contains important information about the installation and operation
of the ELOC3. Pay particular attention to the instructions for safe use. Home2Net GmbH is not
liable for damage caused by failure to follow these instructions. These instructions are part of the
product. They apply exclusively to the ELOC3 of Home2Net GmbH. Keep the instructions and pass
them on to the successor if the operator changes. The installer and the operator must always have
access to these instructions. The installer must be familiar with these instructions and follow them.
1.7
Used symbols
Warning: Please pay attention to avoid damages or injuries
Important information
9 / 33
!
www.ime.de
