EN
9
1. Motor casing
2. Protection ring
3. Blades
4. Bowl
5. Pin
6. Plug
7. Technical data
CLEANING BEFORE FIRST USE
•
Unpack the appliance and remove any inserts or adhesive labels from the product.
•
Remove the protection from the blades (3) [Fig. B].
•
Wash the removable components: the blades (3) and bowl (4) by hand with soap and
water or in the dishwasher without exceeding 55 °C.
•
Clean the protection ring (2) with a damp, well-wrung sponge.
•
Dry with a dry cloth.
ASSEMBLY
•
Insert the blades (3) on the pin (5) [Fig.C].
USE
IMPORTANT!
•
DO NOT use the chopper solely with liquid ingredients.
•
DO not chop parmesan cheese.
•
Chop the ingredients into small pieces.
•
DO NOT exceed the maximum level indicated on the bowl (4).
•
For safety reasons, the appliance must not be used if the protection ring (2)
has not been properly installed.
•
DO NOT introduce more than 50 g of raw meat or solid food.
•
After 30 seconds of operation, let the appliance cool down.
•
After 5 continuous processing cycles, leave the appliance to cool down for
at least 30 minutes.
•
Place the ingredients chopped into small portions in the bowl (4).
•
Place the protection ring (2) inside the bowl (4) [Fig. D].
•
Place the motor unit (1) on the bowl (4).
•
Insert the plug (6) in the socket.
•
Press the motor unit (1) down to operate the appliance [Fig. E].
•
Release the motor casing (1) to stop the appliance.
•
Before lifting the motor casing (1), wait for the blades (3) to stop.
•
Remove the plug (6) from the socket.
CLEANING AND MAINTENANCE
•
Clean the appliance after having used it.
•
Wash the removable components: the blades (3) and bowl (4) by hand with soap and
water or in the dishwasher without exceeding 55 °C.
