• Press the SET button (2) to confirm; the scales set itself to 0.0Kg.
•
If you wish to change the information, repeat the procedure as illustrated above.
noTE
The weight scales switches off automatically 10 seconds after being switched on.
uSE
BoDY AnALIZEr FunCTIon
•
Place the scales on a rigid surface.
•
Press the USERS button (3) to select the user and wait for the appliance to set to 0.0Kg.
•
Step on the scales with
bare feet
and position yourself on the electrodes (10) as shown
in the figure below.
ATTEnTIon!
As well as
positioning yourself on the electrodes (10)
, it is important to make
sure that there is no contact between the legs and between your feet. If necessary,
place a sheet of paper between your legs.
•
Stand still on the device, the weight is permanently displayed on the LCD (1) when this is
stable.
GB
6