EN
13
IMPORTANT GUIDELINES
The appliance is designed to work with tap water; however, if the
water in your area is very hard, mix the tap water (50%) with distilled
and/or demineralised water (50%). Salt concentration in water in
certain seaside areas is very high: in such cases it is important to use
“demineralised water for irons” available on the market. If in doubt,
only demineralised water for steam irons must be used.
Do not use diluting agents, scented liquids or descaling agents as
these substances can damage the product. Do not use water from
dryers, air-conditioners and rain water.
The reservoir may contain some water as each product is tested before
being put on the market.
It is recommended to place a cloth between the iron and the fabric
when using the iron for the first time.
It is recommended to direct a jet of steam into the air before starting
to iron, for any residual condensation to be let out.
SYMBOLS
WARNING
PROHIBITION
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to the illustrative drawing at the beginning of this instructions booklet to verify your
appliance equipment. All the figures are on the cover pages of these instructions for use.
ATTENTION!
The accessories and features vary according to the
models. Identify your model by referring to the illustrative drawings at
the beginning of the instruction booklet and on the product package.
1. Plate temperature LED
2. Temperature adjustment knob
3. Spray button
4. Super-steam button
5. Steam selector
6. Water fill-up opening
7. Spray
8. Calc clean button
9. Max fill-up level
Max
10. Plate with steam holes
11. Water reservoir
12. Technical data
13. Plug
14. Water cup
