13
EN
ASSEMBLY
•
Insert the support (4) into the support seat (4a)[Fig. B]
•
Insert the cutting cone (3) in the support (4) turning it until it’s perfectly fitted [Fig. C]
•
insert the feeding tube (2) on the main body (7) making sure that the notch on the feeding tube
coincides with the symbol
•
rotate the feeding tube (2) clockwise making the notch on the feeding tube coincide with the
symbol , the “clack” sound confirms the correct mounting of the feeding tube
•
Position the container (8) in the main body’s (7) seat [Fig. E].
USE
WARNING! Wash the parts that come in contact with food
before using them.
WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
WARNING!
DO NOT touch moving parts.
WARNING!
DO NOT make the appliance work continuously
for more that 1 minute, let it cool down for 2 minuted. It is
possible to repeat the operation for not more than 5 time. At
the end of the 5 cycles let the appliance rest for 2 hours.
WARNING! DO NOT put the container in the microwave oven.
WARNING! DO NOT use the appliance empty.
WARNING! Turn of the appliance before removing the container.
WARNING! DO NOT use the safety system as an alternative to
the on/off switch.
WARNING! DO NOT cut dry ingredients (ex. spices or dried
fruit)
