46
ES
manta interior. Coloque la segunda sábana y la manta o el edredón.
CONEXIÓN DEL DISPOSITIVO DE CONTROL
• Inserte el conector del dispositivo de control (2) en el conector de la manta interior (1)
para unir ambos.
• Para el modelo de cama doble, repita este procedimiento también para el segundo
dispositivo de control.
• Coloque el cable del dispositivo de control en el suelo, junto a la cama. No aplaste el
cable del dispositivo de control entre el colchón y el bastidor de la cama.
ENCENDIDO Y SELECCIÓN DE LA TEMPERATURA ADECUADA
El dispositivo de control puede ajustarse a los siguientes niveles de temperatura:
II: temperatura máxima
I: temperatura mínima
0: OFF
• Introduzca el enchufe del cable del dispositivo de control en la toma de corriente (3).
• Para calentar la cama, encienda la manta interior ajustando el selector de temperatura (6) en
la posición ‘II’ (temperatura máxima) y cubra la cama con la sábana y la manta o edredón.
• El LED de temperatura (7) se enciende, iluminando el nivel de temperatura seleccionado.
NOTA: el tiempo necesario para que la manta interior se caliente dependerá de la
temperatura ambiente. La temperatura de la manta interior debe ser evaluada
tumbándose sobre la cama en lugar de sólo sentirla con la mano.
USO CONTINUO O DURANTE LA NOCHE
Para uso nocturno o continuo, ajuste el dispositivo de control sólo
al nivel de temperatura ‘I’.
NO se meta en la cama cuando el dispositivo de control esté a
una temperatura superior a la recomendada para uso continuo.
Si el aparato está en reposo con los controles ajustados a una
temperatura más alta, el usuario puede sufrir quemaduras en la
piel o golpes de calor.
¡ADVERTENCIA! NO coloque la unidad de control debajo
de la almohada o debajo de las sábanas cuando esté en uso.
APAGADO Y DESCONEXIÓN
Poner el selector de temperatura (6) en la posición ‘O’ para desconectar la manta interior y, a