background image

 

16 

11. ONE YEAR PARTS WARRANTY 

iMettos warrants to the original purchaser of every new iMettos product, under normal and proper use and maintenance 
service as specified by iMettos and upon proper installation and start-up in accordance with the instruction packet 
supplied with each iMettos unit. iMettos’ obligation under this warranty is limited to a period of one (2) year from the date 
of original installation. 

WARRANTY CLAIMS 

All claims for parts must be made directly through iMettos. All claims should include: 
Personal Details:                                      Products Details: 
Your Name:                                              Model number: 
Your Company:                                        Serial number of the product: 
Address:                                                  Date of purchase: 
Email:                                                      Proof of Purchase : 
Phone: 
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.) 
Please send the above information to services@imettos.co.uk 
Our warranty departments will according to the actual situation and reply you within 24hours. 
 

What is not conected by this Warranty 

iMettos ’    sole obligation under this warranty is limited to replacement of parts, Subject to the additional limitations 
below. 
This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this 
warranty. This warranty is limited to replacement of parts, and the shipment charge is not included. 
No consequential damages. iMettos is not responsible for Economic loss; or special, indirect, or consequential damages, 
including without limitation, losses or damages arising from food or product spoilage claims whether or not account of 
refrigeration failure. 
Warranty is not transferable. This warranty is not assignable and applies only in favor the original purchaser/user to whom 
delivered. Any such assignment or transfer shall avoid the warranties herein made and shall avoid all warranties, express or 
implied, including any warranty of merchantability or fitness for a particular purpose. 
Improperusage. iMettos assumes no liability for parts or labor coverage for component failure or other damages resulting 
from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet 
provided with the unit. 
Residential applications: iMettos assumes no liability for parts or labor coverage for component failure or other damages 
resulting from installation in non-commercial or residential applications. 
 
Alteration, neglect, abuse, issue, accident, damage during transit or installation, fire, flood, acts of god. iMettos is not 
responsible for the repair or replacement of any parts that iMettos determines have been subjected after the date of 
manufacture to alteration, neglect, abuse, accident, damage during transit or installation, fire, flood, or act of god. 
Improper electrical connections. iMettos is not responsible for the repair or replacement of failed or damaged components 
resulting from electrical power failure, the use of extension cords, low voltage, or voltage drops to the unit. 
No implied warranty of merchantability or fitness for a particular purpose: there are no other warranties, expressed, 
implied or statutory, except the one (2) year parts warranty as described above. These warranties are exclusive and in lieu 
of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. These are no 
warranty which extend beyond the description on the face hereof. 
 
 
 
 
 

Summary of Contents for B10



















Reviews: