5
General information
The equipment adopts contacted switch and LED digital panel. The equipment can
be set the heating temperature and heating time. It can alarm automatically when it
reaches the setting time. The tray can be winded around the shaft 180°clockwise
or anticlockwise, easy to operate. The two head have two independent circuit
diagrams, and can be used independently.
1.Technical Parameter
Model
WB-03D
WB-03D-2
Voltage
220~240V
220~240V
Frequency
50~60Hz
50~60Hz
Power
1000W
1000W×2
Dimension
255×440×320mm
510×440×320mm
Temperature Range
124
℃
~230
℃
124
℃
~230
℃
Time Range
99’59’’~00’00’’
99’59’’~00’00’’
2. Installation and Operation
2.1 The using voltage must be coordinated with the supply voltage.
2.2 Install a protect device before the socket, and make sure the well ground connection.
2.3 Place the equipment on a stable working table. Please let the equipment be far
away from the inflammable substance.
2.4 Don’t touch the tray, lid and handle when it warm-up in case of scald.
2.5 Use the wet towel that has cleaner to clean the equipment. Don’t clean it with a
water jet. Don’t dip the equipment into the water, otherwise, it will damage the control
panel and other accessories, and cause any accidence.
2.6 The function of the time setting only alarms the operation time, and the equipment
won’t cut off the power. So the operator should operate it on time.
2.7 Install the unit on an even surface.
2.8 The power cord should not touch any hot parts.
2.9 When a thunder is coming, unplug the plug and stop using the appliance at once.
