6
4.2
Notice for Installment
1. The supply voltage should correspond with the working voltage of the appliance.
2. There is an earth stud at rear of the furnace body, which should be connected with a
copper wire that no less than 1.5mm
2
and ground wire that complying with safety
regulations reliably.
3. Check the connection, voltage and safety grounding after installation.
4. The appliance should be placed in a smooth area and kept a minimum clearance of
10cm away from the incombustible object on both sides and 20cm at the back (e.g.
walls, windows etc.).
5. The fixed arrangement of wire should be equipped with a all-poles disconnecting switch
whose poles have a contact separation at a minimum clearance of 3mm. Grounding
leakage protection switch is recommended. Do not put any sundries in front of the
switch for convenient operation sake.
6. The mounting position should keep away from the flammable and explosive objects.
The ambient temperature should below 45
℃
and the relative humidity should below
85
％
.
7. Installation should be operated by professional technician.
4.3
Special Notice
1. This appliance is not applicable for home use.
2. This product is a commercial machine that needs to be operated by trained cook.
3. Do not sway or tilt the machine during operation.
4. Do not dismantle or self-modify the machine.
5. Dismantlement and self-modification may cause casualty.
6. Do not open the casing of the machine.
7. This product contains high-voltage circuit. Casing dismantlement may cause electric
shock.
8. Unplug and cut the power supply off before cleaning.
9. Do not spray water directly onto the product during cleaning.
10. Water may conduct electricity, which may cause electric shock.
11. Do not pat the product or put any heavy objects onto it.
12. Abnormal operation may cause damage and danger.
13. High temperature may cause scald.
14. Do not touch the appliance with hands directly due to high temperature during or after
operation.
15. To prevent from damages, turn the electric switch off as soon as possible when near the
thunder zone.
16. Do not destroy the control panel with hard or sharp objects.
17. Turn the electric switch off when finish working.
18. Maintenance should be operated by qualified technicians.
19. If the power cord is damaged, in case of danger, replacement should be done by
manufacturer or other maintenance departments or professional technicians.
