7
5. Working Instructions & Operation Flow
1. Before using, check that whether the power supply installation is normal and make sure
the power supply voltage corresponds to the working voltage of the appliance.
2. Plug in the power outlet, rotate the temperature controlled knob to adjust the
temperature to reach the desired range the food needs. The indicator is on and the
appliance starts heating.
3. When the temperature reaches 250
℃
, coat the mould with edible vegetable oil, put the
paste into the mould and cover the lid. When the food is finished, the operator can
make another food. If all the food is finished, please cut off the power supply.
4. Users can set the time according to the difference of prescription of paste and luster of
food customer likes. Generally, the longer the time lasts, the darker the luster will be.
Otherwise, the lighter the luster will be. But the time cannot be too short, or the food will
not be hot and with no luster.
5. Cleaning: Clean the appliance with wet towel containing non-corrosive detergent when
finish working every day. Do not spray it with water directly or dip it in the water to clean,
which may damage electric property and cause electricity safety accident.
6. Routine Inspection
It is necessary to check the machine daily.
Check the machine regularly can avoid serious accident happens.
Stop using if user feels that there are some problems in the circuit or machine.
Check the situation of the machine before or after using every day.
Before using: Whether the machine is tilted?
Whether the control panel is damaged?
Whether the power line is aging, cracking or damaged?
During using: Whether there is strange smell or vibration noise?
Whether the temperature is out of control or any electric leakage?
Whether the power is normal?
7. Cleaning & Maintenance
1
．
In case of accident, please turn the power supply off before cleaning.
2
．
Clean the surface and power line with wet towel containing non-corrosive detergent
when finish working every day. Do not spray the appliance with water directly. Water
infiltration may damage electric property and cause electricity safety accident.
3
．
If not going to use the appliance, please turn off the thermostat and power switch.
4
．
If not going to use the appliance for a long time, please clean it completely and store it
in a well-ventilated warehouse without corrosive gas.
