Step 5
e: Lean the whole frame onto the right
position of the wall.
Install the glass onto the aluminum frame and
push downward the glass support buckle until
the buckles lock with pendant on the aluminum
frame.
f: Look the corresponding size of the screws
into the expansion nut in the wall and steel
expansion bolt on the floor.
Step 4
e
f
a: Buckle the braid tube onto the hanger
again, and connect the tube to the angle
valve on the wall.
b: Open the stop valve on the hose to see
whether it is in good condition.
a
b
glass support buckle
stuck on the glass(4ps)
04
