2. Basic Operation
1. Turn on: Turn on using the on/off switch. This releases the pendulum from its lock
position, activates the horizontal beam and allows all beams to be turned on using the
buttons on the control panel.
2. Horizontal Beam: Horizontal
beam turns on when main switch is
turned on, to turn press the
horizontal button once. Press the
horizontal button once again to
turn horizontal beam off.
3. Vertical Beams: To turn on
vertical beams press the vertical
beam button, this activates front
vertical beam and the plumb spot.
Press the vertical button again to
activate the other vertical beam,
you now have
2 vertical beams emitted at 90°to
each other also forming a cross &
plumb point) on the ceiling.
Press vertical button again to turn vertical beams off.
4. Turn off: To turn off completely, switch the on/off switch to off position, this
deactivates all beams and locks pendulum.
-The level vial is a guide only, unit will self level providing it’s within 3º of level.-
3. Outdoor Use LX33GD
(with detector)
For greater versatility this tool has a pulse mode which enables the tool to be used in
conjunction with a detector (LX33GD) extending the tools range to 30m.
-To enable outdoor mode, turn instrument laser beam on then press the outdoor mode
switch once. This enables the beam pulsate mode so it can be picked up by the
detector.
-Turn on detector (on/off switch), You can now check level and 90º set-outs outdoors
using optional detector
-Press the outdoor mode button once again to disable outdoor mode
4. Battery
The Imex LX33G is powered by a 3.7VDC Li-ion battery
Battery life is approx 20hrs with all beams operating and charge time of approx 3
hours.
To charge battery plug supplied charger unit into 240v power outlet and plug charging
pin into battery. Charger indication light will show solid red when the battery is
charging, charger lamp indicator will change to solid green when charge is complete.
