cation of the address adjusted when the display is
switched on).
The LED DMX (7) will light up when the spotlight is
operated via the DMX controller. When the spot-
light is set to music control in the 8-channel mode,
the LED SOUND (12) will flash to the beat of the
sound pulses picked up by the microphone (13).
Operation without DMX controller
When the spotlight is operated on its own, call up
the menu item for the operating mode (“Automatic”
, “Sound”
or “Colour”
) and select
one of the setting options available. If required, use
the menu to set additional functions (e. g. speed for
the mode “Automatic” or sensitivity for the mode
“Sound”).
For the master/ slave mode (
chapter 1, step 5):
On the master unit, set the mode “Automatic” or
“Sound” and select the setting
for the menu
item
. Set the slave units to the slave mode
(menu item
).
The LED MASTER (10) will light up when the spot-
light is operated in the mode “Automatic” or
“Sound”. In the mode “Sound”, the LED SOUND
(12) will flash to the beat of the sound pulses picked
up by the microphone (13). The LED SLAVE (9) will
light up when the spotlight is operated in the slave
mode.
6.1 Operation of the menu
To operate the menu, use the four buttons (11) and
the display (8). The menu item
is used to
define the display time: display always on or dis-
play switched off after a given time. To switch it on
again, press any button.
1) After switching on the spotlight, the menu item
most recently selected will be called up. To exit
the menu item, press the button MENU or
ENTER.
2) To select a menu item, use the following but-
tons:
– the button MENU or
(up)
– the button
(down)
3) To call up the menu item selected, press the but-
ton ENTER.
4) To set the menu item (e. g.
for the address,
for the colour), use the button
or
.
For some menu items, e. g.
, no setting
can be made.
5) To exit the menu item, press the button MENU
or ENTER.
6.2 Menu structure
13
English
DMX start address /
operation with a DMX controller
mode “Automatic”
(automatic show programs)
speed for the mode “Automatic”
slave mode
channel mode (number of DMX channels)
sensitivity for the mode “Sound”
mode “Sound”
(music-controlled show programs)
output of slave control signals
total brightness
brightness of red
brightness of green
brightness of blue
brightness of white
LEDs on / off
display time
test programs
display indication rotated by 180°
indication of firmware version
for service only
for service only
behaviour of the spotlight after
loss of control signal
mode “colour” (colour spotlight mode)
temperature indication
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
14
