6.3.5 Using sub-addresses
If you use sub-addresses, you will be able to con-
trol up to 66 spotlights (spotlight groups) independ-
ently of each other via a single DMX start address.
Thus, the maximum number of DMX-controlled
units can be considerably higher. The spotlights
with a sub-address are selected via the DMX chan-
nel 8. All spotlights with a sub-address can also be
controlled in sync when the DMX channel 8 is set to
a DMX value less than 10.
1) Adjust the spotlight for the control of 8 DMX
channels,
chapter 6.3.2.
2) Press the button MENU repeatedly until the
indication on the display does not change any
more.
3) Press the button
▲
or
▼
repeatedly until the dis-
play shows
.
4) Press the button ENTER. The display now
shows
and a number between 01 and 66.
5) Adjust the sub-address with the button
▲
or
▼
.
6) Press the button MENU so that the display only
shows
again.
7) Press the button
▲
once so that the display
shows
.
8) Press the button ENTER. The display goes to
the indication
,
,
or
.
9) If
is not shown, press the button
▲
or
▼
as
many times as necessary.
10)
Press the button ENTER. If the display shows
, the sub-address function is activated. If it
shows
, change to
with the button
▲
or
▼
.
11)
For DMX control of the spotlight it is necessary
to go from the menu branch
to the indica-
tion of the start address:
a) Press the button MENU repeatedly until the
display shows
again.
b) Press the button
▲
or
▼
repeatedly until the
display shows
.
c) Press the button ENTER. The display shows
the DMX start address. If now DMX control
signals are received, a dot on the display
flashes.
12)
For operation of the spotlight set the DMX chan-
nel 8 at the light controller to the DMX value cor-
responding to the sub-address of the spotlight
(fig. 5).
Selection of spotlights with a sub-address
via DMX channel 8
6.4 Automatic display switch-off
Activate the automatic display switch-off if the dis-
play is not to light up permanently but for 15 sec-
onds only after a button is pressed.
1) Press the button MENU repeatedly until the
indication on the display does not change any
more.
2) Press the button
▲
or
▼
repeatedly until the dis-
play shows
.
3) Press the button ENTER. The display goes to
the indication
,
,
or
.
4) If
is not shown, press the button
▲
or
▼
as
many times as necessary.
5) Press the button ENTER. The display shows the
present adjustment:
: The display lights up permanently.
:
The display only lights up after a button is
pressed.
Select the adjustment with the button
▲
or
▼
.
6) Then switch back to the desired operating mode
with the operating buttons.
DMX
value
Sub-
address
DMX
value
Sub-
address
DMX
value
Sub-
address
000 – 009
all
010 – 019
01
212
23
234
45
020 – 029
02
213
24
235
46
030 – 039
03
214
25
236
47
040 – 049
04
215
26
237
48
050 – 059
05
216
27
238
49
060 – 069
06
217
28
239
50
070 – 079
07
218
29
240
51
080 – 089
08
219
30
241
52
090 – 099
09
220
31
242
53
100 – 109
10
221
32
243
54
110 – 119
11
222
33
244
55
120 – 129
12
223
34
245
56
130 – 139
13
224
35
246
57
140 – 149
14
225
36
247
58
150 – 159
15
226
37
248
59
160 – 169
16
227
38
249
60
170 – 179
17
228
39
250
61
180 – 189
18
229
40
251
62
190 – 199
19
230
41
252
63
200 – 209
20
231
42
253
64
210
21
232
43
254
65
211
22
233
44
255
66
14
GB
