10
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Nederlands
Nederlands Pagina
Español
Español Página
Polski
Polski Strona
1 Overview (Figs. 1 – 3)
1
Microphone for music control
2
Buttons for menu control
3
Display; the display indication will disappear after
a few seconds when the unit has been set into
operation or when no button is pressed; it will
reappear when a button is pressed
4
3-pole XLR control connections:
input DMX IN
output DMX OUT
5
Support for the mains fuse
Always replace a blown fuse by one of the same
type!
6
Mains jack for connection to a socket (230 V/
50 Hz) via the mains cable provided
7
Eyebolt to attach a safety rope
8
Mounting bracket
2 Safety Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with .
WARNING
The unit uses dangerous mains volt-
age . Leave servicing to skilled per-
sonnel and do not insert anything
into the air vents . Inexpert handling
may result in electric shock .
•
The unit is suitable for indoor use only . Protect it
against dripping water, splash water and high air
humidity . The admissible ambient temperature
range is 0 – 40 °C .
•
Do not place any vessels filled with liquid, e . g .
drinking glasses, on the unit .
•
Immediately disconnect the mains plug from
the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
When transporting the unit, always seize the
base . Never carry the unit by its rotary arm or
its head!
•
For cleaning the housing, only use a dry, soft
cloth; never use water or chemicals . For cleaning
the plastic pane in front of the lenses, a mild
detergent may be used . Always disconnect the
mains plug before cleaning .
•
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is
not safely installed or not correctly connected or
operated, or if it is not repaired in an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
LED Beam Moving Head
These instructions are intended for installers of the
unit and for users with basic knowledge in DMX
control . Please read the instructions carefully prior
to operation and keep them for later reference . All
operating elements and connections described can
be found on page 2 .
Contents
5.1 Connection to a DMX controller
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
6.2 Operation without DMX controller
. . . . . . . . . . . . . . . .
Menu Structure and DMX Functions
English
English Page
Summary of Contents for XBEAM-410LED
Page 39: ......
