USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com
Designed in Czech Republic, Made in China
TECHNICAL SPECIFICATIONS:
Protocol: WiFi
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: Wifi: 20 dBm
Network standby power (Pnet): 0.4W
Power: AC 120 - 240 50Hz/60Hz
Maximum current: 2x 5A
Load range: 2x 1150W / 2x 150W for LED lighting
Thermal fuse, overheat protection: Yes
Current fuse, overvoltage and overload protection: Yes
Communication protocol: WiFi, Tuya support.
Wireless range: 30 m direct visibility, 10 m in built-up area
Operating temperature: -10°C to 40°C
Operating humidity: 20% to 80%
Size: 46 x 46 x 18 mm (without bracket)
Degree of protection: IP20
SAFETY NOTICE
Failure to follow the recommendations can be dangerous or cause a violation of the law.
The manufacturer, importer, distributor and/or dealer will not be liable for any loss or
damage resulting from failure to follow the instructions in this manual.
1. Risk of electric shock. The main circuit breaker or fuse must be switched off during
installation.
2. Only a licensed electrician may install the equipment.
3. Place the equipment out of the reach of children.
4. The equipment must be located away from water, excessive moisture or heat.
5. Do not install the device near a source of strong electromagnetic radiation. Interference
and malfunction could occur.
6. Do not attempt to repair, modify or disassemble the equipment. Electrical shock and
consequential damage to equipment and property could result.
INSTALLATION AND WIRING DIAGRAM:
- Switch off the power supply before installation
- Connect the wires according to the diagram
- Insert the module back into the wiring box
- Switch on the power supply and proceed to install the device in Immax NEO PRO
CONTROL YOUR HOME FROM ANYWHERE:
DOWNLOAD IMMAX NEO PRO AND REGISTER
Scan the QR code and download the Immax NEO PRO app.
Or search for and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO app and tap “Register” to create your own account.
- Once you have completed registration, log in with your account.
PAIRING THE PRODUCT TO THE APPLICATION
Preparation: switch on the Immax NEO product and open the Immax NEO PRO applica-
tion. Make sure that you are connected to the same WiFi network that the product will be
connected to or that the Immax NEO PRO smart gateway is connected to.
Bluetooth add-on option
Put the device into pairing mode (reset the device according to the manual). If you do not
have Bluetooth enabled on your mobile device, you will be prompted to enable it. Once
Bluetooth is turned on, the mobile device will automatically find the product. A window
will appear in the app informing you that a new device has been found. Click the “Contin-
ue” button and then the “+” button. Enter the WiFi network access data and confirm. The
product will then be paired and added to the Immax NEO PRO app.
Possibility to add without using Bluetooth
Put the device into pairing mode (reset the device according to the manual). In Immax
NEO PRO, click on the Room tab and then on the “+” button to add the device. In the
Immax NEO tab, select the product. Enter the WiFi network access data and confirm. The
product will then be paired and added to the Immax NEO PRO app.
RESET THE DEVICE
- Long press the button on the controller for more than 10 seconds. The LED will flash
rapidly or an audible alert will sound - the device is reset
- Switch the device off and on 5 times with the wall switch. The interval between switching
off and on should be 1-2 seconds. After 5 power-ups the LED will flash rapidly or an
audible alert will sound - the device is reset.
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small parts, which may
cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage
skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow
any substance from the battery to come into contact with the eyes or skin. Every battery
may burst or even explode if exposed to fire or other forms of excessive heat. Take care
when handling the batteries. To reduce the risk of injury from mishandling the batteries,
take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION: The product and batteries should be disposed of at a recycling centre. Do not
dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the installation site
according to valid regulations. The installation must only be carried out by an individual
with the appropriate certification in the field of electronics. During installation or when a
fault is detected, the power cable must always be disconnected from the socket (in the
case of direct connection, the relevant circuit breaker must be switched off). Improper
installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not
operate the device if the power cord shows signs of damage. CAUTION: Follow the
instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft cloth, do
not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be
found at www.immax.cz
