Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com
Made in P.R.C.
POPIS VÝROBKU
Say goodbye to use remote controls for each of the IR home appliances such as
TV, Air-conditioner , TV box, light, Fan, Audio, etc. You can remotely control these
devices with the tap of your finger on the mobile App, Also you can real-time
monitor the temperature and humidity on App at anytime and anywhere.
Micro Port
Reset Button
Stand
LED Indicator
Screen
(Switch between and
℃
)
F
。
TECHNICAL SPECIFICATIONS:
Color: black
Protocol: Wi-Fi
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: WiFi: 20dBm
IR frequency: 38KHz
IR range: ≤ 12 meters
Humidity detection range: 0-90% RH
Temperature detection range: 0 - +60°C
Material: plastic
Degree of protection: IP20
Power supply: DC 5V / 1A
Dimensions: 60x60x20mm
DOWNLOAD IMMAX NEO PRO AND REGISTRATION
Scan the QR code and download the Immax NEO PRO application.
Or find and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO application and click on “Register” and create your
own account.
- If you have finished registration, log in to your account.
PAIRING THE PRODUCT INTO THE APPLICATION
Preparation jobs: Power on thes IR and enter the home of APP, please make sure
your mobile and the smart kits are connected to the same WIFI.
Possibility to add via Bluetooth
Connect your mobile to your Wi-Fi router , supply power to the remote control
with Micro charging cable, click“+” in the upper right corner of homepage or click
“Add Device” .
Turn on the bluetooth in mobile: The app will ask you to turn on the bluetooth in
your mobile, then you choose the device to add.
enter into your Wi-Fi name and Wi-Fi password, it will connect the network
automatically.
Do not turn on the bluetooth
Select ”Universal Remote Control ” from“Others”, enter into the Wi-Fi password,
make sure the LED indicator is blinking rapidly, if not, please hold the reset button
for about 5s till indicator blink quickly.
it will connect automatically.
If your Wi-Fi router open both 2.4GHz and 5GHz with the same name, enter Wi-Fi
password, please select “AP Mode”, hold the reset button for about 5 seconds till
LED indicator blink slowly, connect your
mobile to the device’s hotspot: “SmartLife-XXXX”, then click to return to App
interface, it will connect to Wi-Fi router automatically,configuration complete.
ADDING A CONTROLLED DEVICE
Tap “Smart IR”, then click ”Add ”, select the device and its brand you need
control, you can click “Quick Match” or “ Manual Mode” to matchthe buttons,
please match at least 3 buttons to check if the device reacts properly, if yes, then
match completed, you can control the device. If you added the same device type
with the same brand in one room, please edit the device with different names to
avoid control confusion.
If you can not find the brand of the device in the brand list, you can choose “DIY”
to learn the buttons of other brands’ remote control, so you can also control the
device.
Safety Information
CAUTION: Keep out of reach of children. This product contains small parts, which
may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can
damage skin, clothing or area where the battery is stored. To avoid the risk of
injury, do not allow any substance from the battery to come into contact with the
eyes or skin. Every battery may burst or even explode if exposed to fire or other
forms of excessive heat. Take care when handling the batteries. To reduce the risk
of injury from mishandling the batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and
disposal.
CAUTION: The product and batteries should be disposed of at a recycling centre.
Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
installation site according to valid regulations. The installation must only be carried
out by an individual with the appropriate certification in the field of electronics.
During installation or when a fault is detected, the power cable must always be
disconnected from the socket (in the case of direct connection, the relevant circuit
breaker must be switched off). Improper installation can damage the product and
cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not
operate the device if the power cord shows signs of damage. CAUTION: Follow
the instructions in the enclosed manual.
Maintenance
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.cz
Smart home devices
USER MANUAL
