USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com
Made in P.R.C.
Immax NEO LITE Smart Christmas lights
INSTALLATION
1.Use the power adapter with DC12/24V of output voltage only.
2.Install the controller correctly, use 3M tape to fix it.
3.Please unfold the LED strip to avoid the overheat issues. Please connect the
cables of LED strip with the right position on the controller. Test the APP to check if
it can control the LED strip correctly. If everything goes well, go to next step.
4.Check and ensure the power supply, controller and LED strip are connected
correctly
ATTENTIONS
1. Do not put any metal around the controller, which could blocked WiFi signal.
2. Ensure the power supply and controller are connected correctly.
3. The power supply output voltage should be same as LED strip working voltage.
4. Do not cover anything on the surface of power supply, controller and LED strip.
5. Ensure the connection is correct before powering.
PRODUCT FUNCTIONS DIAGRAM
10cm
10m/16m
1.5m
1.5m
MODE
COLOR
COLOR
WILL
DOWNLOAD AND REGISTRATION
Scan the QC Code to download “ Smart Life” APP. Or Search“Smart Life”in App
store or Google Play to install the APP. Open the “ Smart Life” APP, tap “Register”-
to get an account with your phone number or E-mail. Sign in the APP.
APP CONNECTION
Preparation jobs: Power on the LED strip and enter the home of APP, please make
sure your mobile and the smart kits are connected to the same WIFI.
Solution 1)
Reset the LED chain - long press the L button on the controller for more than
10 seconds. The WiFi LED on the controller will flash red quickly. Find the “+”(in
the corresponding room of the APP) to add devices. If your mobile have already
turned on bluetooth before connecting the LED strip, then no need to turn on
bluetooth again, the APP will connect to the LED strip automatically. If your mobile
didn’t turn on bluetooh before connecting the LED strip, the APP will pop up an
interface with tips to ask you to turn on bluetooth. Then please choose “Allow”,
then the bluetooth function of your mobile will be turned on. After that, the APP
will pop up tips with info of the LED strips, then choose “Go to add”. Will go into
an interface of bluetooth device, choose the “+” and go into next interface(Enter
Wi-Fi password). Input the password of the WIFI and choose “Confirm”, then it
will go into status of “Connecting......”, you will need to await for your mobile to
pairing with the controller at this step. Choose “Done” when it shows “Added
successfully”, then go into operation modes. (If solution 1 is not suitable with your
devices, please refer to solution 2)
Solution 2)
Reset the LED chain - long press the L button on the controller for more than 10
seconds. The WiFi LED on the controller will flash red quickly. Find the “+”(in the
corresponding room of the APP) into interface of “Add manually”. Then choose
“lighting” to choose the correct smart devices and go into interface of “Select 2.4
GHz Wi-Fi Network and enter password”.
Enter the Wi-Fi password, then choose “Next” and waiting until pairing success(-
make sure your mobile and the smart devices are in the same Wi-Fi networks).
Then go into the interface of “Scanning devices”, after scanning success and
choose “Next”, it will pop up interface of “add successfully” and choose “Done”
to go into the operation modes.
APPLICATION
In Immax NEO PRO you can turn the LED chain on and off or control preset
programs and the timer.
18 PROGRAMS
You can choose from these 18 preset programs:
Steady, Glow, Overlay, Stack, Updown, Chase, Snake, Sparkle, Twinkle, Fade,
Wave, Buddly, G-Force, Fireworks, Jump, Blending, Rainbow, Carnival
TIMER
Using this function you can set the desired lighting schedule - on, off and days of
the week. If the timer function is active, the LED next to the Timer item lights up
on the controller.
CONTROLER
Preset programs
Colors
Timer
WiFi
L button: - press briefly to switch between preset programs
Press and hold (more than 10 seconds) to reset the device
R button: - press briefly to switch colors
Press and hold (more than 4 seconds) to turn the LED chain on or off.
Led strip
Transformer
Controler
RF Remote
