12
1
IE
GENERAL WARNINGS.
All Immergas products are protected with suitable transport
packaging.
The material must be stored in a dry place protected from the
weather.
This instruction manual provides technical information for
installing the Immergas kit. As for the other issues related to kit
installation (e.g. safety at the workplace, environmental protection,
accident prevention), it is necessary to comply with the provisions
specified in the regulations in force and with the principles of good
practice.
Improper installation or assembly of the Immergas appliance and/
or components, accessories, kits and devices can cause unexpected
problems for people, animals and objects. Read the instructions
provided with the product carefully to ensure proper installation.
Installation and maintenance must be performed in compliance
with the regulations in force, according to the manufacturer's
instructions and by professionally qualified staff, meaning staff
with specific technical skills in the plant sector, as envisioned by
the law.
GENERALITIES.
Using this kit, the solar thermal system is combined with the Trio
Pack Electric. Before performing any intervention, disconnect
the power supply to the installed indoor unit by acting on the
switch placed upstream from the appliance.
INSTALLATION ON TRIO PACK ELECTRIC.
To install proceed as follows:
- Close the cold water inlet upstream of the system and empty
the storage tank unit.
- Disconnect the power supply.
- Remove the two plugs on the storage tank unit to make the
connections of the relative pipes (UCS and EFS) (see Fig. 7).
- Remove the two pipes indicated in figure 1.
