Immergas MAGIS Victrix, Instruction And Warning Book

Immergas S.p.A. declines all liability due to printing or transcription errors, reserving the right to make any modifications to its technical and commercial 

documents without forewarning.

CE DECLARATION OF CONFORMITY

Under the "Gas Appliances" Directive 2009/142/EC, "Electromagnetic Compatibility (EMC)" Directive 2004/108/EC, "Boiler Efficiency" Directive 

92/42/EC and "Low Voltage" Directive 2006/95/EC.

The Manufacturer: Immergas S.p.A. v. Cisa Ligure n° 95 42041 Brescello (RE)

DECLARES THAT: Immergas boiler model: 

Magis Victrix

complies with the same European Community Directives

Mauro Guareschi

Research & Development Director

Signature:

Dear Client,

Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time.

As an Immergas customer 

you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your boiler. Read the following pages carefully: you 

will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will confirm your satisfaction for the Immergas product.
Contact our area authorised after-sales centre as soon as possible to request commissioning. Our technician will verify the correct functioning conditions; he 

will perform the necessary calibrations and will demonstrate the correct use of the generator.
For assistance and scheduled maintenance contact Authorised Immergas After-Sales centres: they have original spare parts and are specifically trained directly 

by the manufacturer. 

General recommendations

All Immergas products are protected with suitable transport packaging. 
The material must be stored in dry environments protected against bad weather.
The instruction book is an integral and essential part of the product and must be consigned to the new user also in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
This instructions manual provides technical information for installing Immergas boilers. As for the other issues related to boiler installation (e.g. safety in the work 

site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in force and principles of good practice.
In compliance with legislation in force, the systems must be designed by qualified professionals, within the dimensional limits established by the Law. Installation 

and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by professionally qualified 

staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kit and devices can cause unexpected problems to people, animals 

and objects. Read the instructions provided with the product carefully to ensure a proper installation.
Maintenance must be carried out by skilled technical staff. The Immergas Authorised After-sales Service represents a guarantee of qualifications and 

professionalism.
The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially 

dangerous. 
If errors occur during installation, operation and maintenance, due to non compliance with technical laws in force, standards or instructions contained in this 

book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damages and the 

appliance warranty is invalidated. 
For further information regarding legislative and statutory provisions relative to the installation of gas heat generators, consult the Immergas site at the 

following address: www.immergas.com