Immergas UB INOX SOLAR 200-2, Instruction Booklet And Warning

Dear Client,

Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time.

As an Immergas customer 

you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your storage tank unit.

Read the following pages carefully: you will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will confirm 

your satisfaction for the Immergas product.

For any interventions or routine maintenance contact Immergas Authorised Centres: these have original spare parts and boast of specific preparation directly 

from the manufacturer.

General recommendations

The instruction book is an integral and essential part of the product and must be consigned to the user.

It must be kept well and consulted carefully, as all of the warnings supply important indications for safety in the installation, use and maintenance stages.

Installation and maintenance must be performed in compliance with the regulations in force, according to the manufacturer and by professionally 
qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law in force.

Incorrect installation can cause injury to persons and animals and damage to objects, for which the manufacturer is not liable. Maintenance must be carried 
out by skilled technical staff. The Immergas Authorised After-sales Service represents a guarantee of qualifications and professionalism.

The appliance must only be destined for the use for which it has been expressly declared. Any other use must be considered improper and therefore dangerous.

If errors occur during installation, running and maintenance, due to the non-compliance of technical laws in force, standards or instructions contained in 
this book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damage 
and the appliance warranty is invalidated.

For further information regarding legislative and statutory provisions relative to the installation, consult the Immergas site at the following address: www.
immergas.com.

DECLARATION OF CONFORMITY

For the purpose and effect of the 97/23/CE PED Directive, 2004/108/CE EMC Directive and 2006/95/CE Low Voltage Directive.
The Manufacturer: Immergas S.p.A. v. Cisa Ligure n° 95 42041 Brescello (RE)

DECLARES THAT: the Immergas storage tanks model: 

UB INOX Solar 200-2

are in compliance with the same European Community Directives.

Mauro Guareschi

Research & Development Director

Signature:

INDEX

Immergas S.p.A. declines all liability due to printing or transcription errors, reserving the right to make any modifications to its technical and commercial 
documents without forewarning.

1 

Storage tank unit installation ................... 4

1.1  Installation recommendations. ................ 4
1.2  Main dimensions. ...................................... 4
1.3  Connection group. .................................... 4
1.4  Electrical connection: ............................... 5
1.5  System filling. ............................................. 5
1.6  Domestic hot water storage tank unit. ... 5
1.7  Hydraulic circuit resistance. .................... 5
1.8  Circulation pump. ..................................... 5
1.9  DHW mixing valve. .................................. 6
1.10  Kits available on request. .......................... 6
1.11  Main components. .................................... 6
1.12  Circulation unit main components. ....... 7
1.13  Commissioning. ........................................ 7
1.14  Solar circuit system filling. ....................... 7
1.15  Solar control unit user instructions. ....... 8

2 

Instructions for use and  maintenance. 11

2.1  Cleaning and maintenance. ...................11
2.2  Emptying the storage tank unit. ............11
2.3  Case cleaning. ..........................................11
2.4  Decommissioning. ..................................11
2.5  Control panel. ..........................................11

3 

Control and maintenance  .....................12

3.1  Hydraulic diagram. .................................12
3.2  Wiring diagram. ......................................13
3.3  Yearly appliance check  

and maintenance. ....................................13

3.4  Casing removal. .......................................14
3.5  Replacing the anode. ...............................14
3.6  Technical data. .........................................14

USER 

page

INSTALLER

page

MAINTENANCE TECHNICIAN

page