51
INS
TALLER
U
SER
M
AINTEN
AN
CE
TECHNI
CI
AN
TECHNI
CAL
D
AT
A
The use of components involving use of electrical power requires some fundamental rules to
be observed such as:
– do not touch the appliance with wet or moist parts of the body; do not touch when barefoot;
– never pull electrical cables or leave the appliance exposed to atmospheric agents (rain, sun-
light, etc.);
– the appliance power cable must not be replaced by the user;
– in the event of damage to the power supply cable, switch off the appliance and contact exclu-
sively qualified staff for replacement;
– if the appliance is not to be used for a certain period, disconnect the main appliance external
switch.
Water at a temperature of more than 50 °C can cause serious burns.
Always check the water temperature before any use.
The temperatures indicated by the display have a tolerance of +/- 3°C due to environmental conditions that cannot be blamed on
the appliance.
After brief periods of inactivity, visually check that the siphon is properly filled with condensate and top it up if necessary.
If you smell gas in the building:
– close the gas meter interception device or the main interception device;
– if possible, close the gas interception cock on the product;
– if possible, open doors and windows wide and create an air current;
– do not use open flames (e.g. lighters, matches);
– do not smoke;
– do not use electrical switches, plugs, door bells, telephones or intercom devices in the build-
ing;
– call an authorised company (e.g. Authorised Technical Assistance Centre).
if you smell burning or see smoke coming out of the appliance, switch it off, disconnect power,
close the main gas cock, open the windows and call an authorised company (e.g. Authorised
Technical Assistance Centre).
At the end of its service life, the appliance must not be disposed of like normal household waste
nor abandoned in the environment, but must be removed by a professionally authorised com-
pany as required by current legislation.
Contact the manufacturer for disposal instructions.
2.2 CLEANING AND MAINTENANCE
To preserve the appliance's integrity and keep the safety features, performance and reliability, which distinguish it, unchanged
over time, you must execute maintenance operations on a yearly basis in compliance with what is stated in the relative point at
“annual check and maintenance of the appliance”, in compliance with national, regional, or local standards in force.
