23
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
•
Summer (
):
in this mode the boiler only
operates for domestic hot water heating.
By pressing the + or - buttons just once (4
fig. 2-1) it is possible to read the temperature
setting. By pressing them again you can change
the settings as needed. You will need to press
“B” to save the new value. The temperature
reading will flash during adjustment. If a
certain amount of time lapses without saving
the value, the boiler will exit setting mode and
maintain the previous setting.
• Winter:
in this mode the boiler functions both
for heating domestic hot water and heating the
environment.
By pressing the + or - (2 fig. 2-1) buttons once,
you can view the temperature setting. By press-
ing them again you can change the setting as
needed. You will need to press “B” to save the
new value. The temperature reading will flash
during adjustment. If a certain amount of time
lapses without saving the value, the boiler will
exit setting mode and maintain the previous
setting.
2-4
2-5
• Stand-by mode ( ):
by pressing buttons “A”
and “C” at the same time it is possible to place
the boiler in stand-by.
In this mode the boiler is considered powered
on but not active. Accordingly, the appliance's
anti-freeze function is guaranteed. To turn it
back on simply press "B".
• DHW exclusion (
):
with the boiler set up
for DHW heating, press “C” momentarily to
exclude DHW heating mode operation. To
restore DHW heating, press "C" again.
2-6
2-7
• Anomaly records:
press and hold “C” down to
access the records of the last 8 anomalies that
have affected the boiler (list from H i 0 to H i 7,
where H i 0 is the most recent anomaly). When
you are in the menu, the screen will display, in
order, number “bu 0”, the number and code for
the anomaly.
To scroll through the list, press b and
- (ref. 2 fig. 2-1).
To exit the menu, press and hold "C" down
again.
Warning:
anomalies with a code over “90” are
not saved in the anomaly records.
-
Slave boiler anomalies
(simple cascade in-
stallation). Slave boiler anomalies are displayed
on the Master boiler. After entering the menu,
press + and - (ref. 8 fig. 2-1) to alternate be-
tween Master “bu 0” and Slave “bu 1” boilers.
2-8
Summary of Contents for VICTRIX PRO 35 1 I
Page 1: ...VICTRIX PRO 35 55 1 I IE Instruction and warning book 1 038715ENG...
Page 2: ......
Page 42: ......
Page 43: ......
