21
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
2.4 DESCRIPTION OF FUNCTIONING
STATES
Below find a list of boiler functioning states that
appear on the multifunction display (24) by
means of the indicator (6) with a brief descrip-
tion. Refer to the instruction book for a complete
explanation.
Display (6)
Description of functioning states
SUMMER
Summer functioning mode without request in progress.
Boiler in stand-by for domestic hot water request.
WINTER
Winter functioning mode without request in progress.
Boiler in stand-by for domestic hot water or central heating request.
DHW ON
Domestic hot water mode in progress.
Boiler functioning, domestic hot water heating in progress.
CH ON
Central heating mode in progress.
Boiler functioning, central heating in progress.
F3
Antifreeze mode in progress.
Boiler functioning to restore the minimum safety temperature against boiler freezing.
CAR OFF
Remote Control (Optional) off.
DHW OFF
With domestic hot water priority disabled (indicator 15 off), the boiler only functions in room central heating mode for
duration of 1 hour, however keeping the domestic hot water at minimum temperature (20°C), after which the boiler goes
back to the normal functioning, previously set.
In the case of use with Super CAR in concomitance with the functioning period in reduced D.H.W. Timer mode, DHW
OFF will appear on the display and indicators 15 and 2 switch off (see Super CAR instructions manual).
F4
Postventilation in progress.
Fan in function after a request for domestic hot water or central heating in order to evacuate residual flue gas.
F5
Postcirculation in progress.
Pump in function after a request for domestic hot water or central heating in order to cool the primary circuit.
P33
With Remote Control (Optional) or room thermostat (TA) (Optional) in block, the boiler functions all the same in central
heating mode. (Can be activated through menu “M3”. It allows you to activate the central heating even if the Remote
Control or TA are out of order).
STOP
Reset attempts finished
Wait for 1 hour to re-acquire 1 attempt.
(See No ignition block).
ERR xx
Anomaly present with relative error code.
The boiler does not work. (see troubleshooting paragraph).
SET
When the domestic hot water temperature selector switch is turned (1 Fig. 2-1) it displays the control status of the domes-
tic hot water temperature in progress.
SET
When the central heating temperature selector switch is turned (1 Fig. 2-1) it displays the control status of the boiler flow
temperature for room central heating.
SET
In the presence of the external probe (optional) replace the “SET” item.
The value that appears is the correction of the flow temperature with respect to the functioning curve set by the external
probe. See OFFSET on external probe graphics (Fig. 1-7).
F8
System deaeration in progress.
During this phase, which lasts 18 hours, the boiler circulator pump is started at preset intervals, thus allowing deaeration
of the central heating system.
F9
Only in the case of use with Super CAR, does it allow to activate the anti-legionella function, which takes the temperature
of the water in the storage tank to 65°C for 15 minutes. (see Super CAR instruction manual).
Summary of Contents for VICTRIX ZEUS SUPERIOR
