HD1-E CANopen instruction manual
- 22 -
11. State LED
Names of CANopen state LED are shown in Table 27.
Table 27 Names of CANopen state LED
State LED
Name
Color
Running LED (RUN)
Green
Error LED (ERROR)
Red
The descriptions of running LED and error LED are shown in Table 28 and Table 29.
Table 28 Description of error LED (ERROR)
No.
Error
State
Description
1
Off
No error
Components in working state
2
On
Bus switched off or
inverter fault
CAN controller bus switched off or inverter fault
3
Flickering
Initialization error
Address setting error
4
Flickered and off
Frame error
Receiving frame loss or error
Table 29 Description of running LED (RUN)
No.
Run
State
Description
1
Flickered and off
Stop
Components in stop state
2
Flickering
Pre-operation
Components under pre-operation
3
On
Operation
Components under operation
4
Off
Fault
Check whether the connection of reset pins and power supply is correct.
