Slew Drives
Transport, packaging, and storage
16
4
Transport, packaging, and storage
4.1
Safety instructions for transport
WARNI
WARNI
WARNI
WARNING
NG
NG
NG
Never position yourself under a suspended load! Swinging
or falling parts may cause injury or life-threatening
danger.
WARN
WARN
WARN
WARNIIIING
NG
NG
NG
Carefully supervise the lifting processes and transport.
Only use the transport methods described here. A life-
threatening crushing hazard exists if the slew drive falls.
IMPORTANT
Proceed with caution when transporting objects! Comply
with instruction symbols on the packages and only use the
prescribed attachment points. Improper transport may
cause significant damage.
IMPORTANT
Avoid impact when transporting! Improper transport may
cause significant damage to the component.
4.2
Transport
Transport by specialized personnel only!
Transporting packages
Packages that are not attached to pallets can be transported with
a forklift or forklift truck under the following conditions:
The forklift or forklift truck must be configured appropriately for
the weight of the transport units.
The operator must be authorized to operate the forklift.
Attachment:
1.
Place sufficiently long and wide extensions (e.g. of wood or
metal) between the forks and the package so that the weight
is distributed on the support surface.
2.
Drive in the forks, with extensions if needed, far enough that
they protrude on the opposite side.
3.
If there is an eccentric center of gravity, ensure that the
package cannot tip.
4.
Lift the package and start the transport.
