7
UNPACKING YOUR SMARTSCOOT™
The SmartScoot™
arrives is a strong dual walled carton. Carefully cut the packaging straps
from the carton using scissors and then cut the packing tape to allow access. The scooter
arrives fully folded. The package also includes the adjustable seat, battery charger and
charging cord, removable basket, basket hardware, luggage rack and Allen wrenches. The
battery and light may be shipped separately. Accordingly, you will find packaged:
• The Folded scooter
• The Adjustable Seat and Seat back
• The Battery (in some cases, the battery may be shipped separately)
• The Battery Charger and Charging Cord
• The Basket and Hardware
• The Luggage Rack
• LED Handlebar Light
• Allen Wrenches
REMOVING THE PRODUCT
Our product is carefully packaged to ensure that the SmartScoot™
arrives in perfect condition.
1. Using scissors, carefully cut the white wire ties from the product.
CAUTION
– Do not
cut the black wire ties.
These are used to route the wiring throughout the scooter.
2. Remove and discard all inner corrugated and other packing materials.
3. Lift the scooter by the center bar out of the box and place it on a level flat surface. Remove
the rest of the items from the box making sure that the above items are present. Inspect all
items before using and take full responsibility for assuring that the equipment is in good
working order and is safe to use.
4. Your battery arrives half charged. Make sure it is fully charged before use. It will take about
5 hours for the initial charge.
PLEASE NOTE - Any and all returns must be authorized in advance. The original receipt is
required for any and all returns. The scooter must be returned in its original box.
